Bosch MD1 (diesel)
Bosch MD1CS089
The Bosch MD1CS089 is an ECU of the Bosch MD1 (diesel) family. The tools we resell have announced access by Bench, Boot Glitch and unlock; the announcements, dated and sourced, are below.
MD1 is the diesel counterpart of MG1: the same generation of Bosch hardware, introduced in the same year (2016) to replace EDC17, with the same access constraints. It is the family found on recent European diesels, and the one where the question "OBD or bench?" comes up most often before anything is taken apart.
Vehicles we have met it on
Each link leads to the vehicle page: factory output and gains per engine variant. This list does not say what this ECU is fitted to in general, only where we found it.
Access, tool by tool
What each vendor announced for this reference, with the date and the original announcement. The route is the one the announcement states; when it does not, the cell says so.
| Tool | Announcement | Date | Announced route |
|---|---|---|---|
| MagicMotorsport | Korhex — Boot Glitch for Bosch MD1CS069 / MD1CS089 (TC299) | 19 October 2026 | Bench · Boot Glitch |
| MagicMotorsport | MG1CS049 & MD1CS089 Unlock No RFT | 6 July 2026 | Boot Glitch · unlock |
What we have delivered on it
Options already carried out on this reference. Each link leads to its page: what it does inside the ECU, what we expect from you and what it costs in tokens.
What to send
- 1The complete original read, exactly as your tool produced it — OBD, bench or boot, whichever route you took.
- 2The tool and the mode used, so the file comes back in the format your tool expects.
- 3The DTC codes to remove if you order a DTC off.
Turnaround and price
60 minutes maximum during opening hours for a file already developed. A file never developed on this reference goes through custom work first: we then tell you the turnaround instead of promising one.
See the token price list →Frequently asked questions
Which tools open the Bosch MD1CS089, and by which route?
According to the announcements of the vendors we resell: MagicMotorsport (19 October 2026): Bench, Boot Glitch; MagicMotorsport (6 July 2026): Boot Glitch, unlock. Each announcement is linked and dated on this page: an announced opening holds as of its date.
Which options has Shop4Tuner already delivered on the Bosch MD1CS089?
AdBlue / SCR off. Each option is calibrated for this ECU, and feasibility on your vehicle is confirmed before your tokens are committed.
What do I need to send for a Bosch MD1CS089 file?
The complete original read, exactly as your tool produced it — OBD, bench or boot, whichever route you took. The tool and the mode used, so the file comes back in the format your tool expects. The DTC codes to remove if you order a DTC off.
What we have already handled
This ECU has already been through our workshop, on Same.
The announcements in detail
Announcements from the tool vendors whose publications we relay, most recent first. Each line links to the original announcement with its date: an opening announced two years ago says nothing about the version you have installed.
Flex version 8.26.0.0 extends Korhex to the Bosch MD1CS069 and MD1CS089 control units on TriCore TC299 processors fitted to commercial and industrial vehicles. The Boot Glitch is performed without working on the PCB: a mask described in the manual locates the glitch point and positions Korhex; once connected, the technician either keeps working in Boot Glitch or unlocks the unit and continues in Bench. Memories: read, write and checksum of the internal flash, read and write of the EEPROM, full backup. An FLS0.20 Boot Glitch licence or a Flex Full FLS0.5 configuration is required; about 30 seconds to connect and glitch, 2 min 30 s to read and 2 minutes to write. Vehicles cited: Fiat Ducato 2.2 MultiJet III, DR PK8 2.0 Turbo, John Deere 5G (5115G), Massey Ferguson MF 3xx and New Holland T5 Series II, all 3.6 L. The changelog reports a more reliable Boot Glitch connection.
Flex 8.3.0.0 extends Boot Glitch mode: BMW Bosch MG1CS049 (TC298) and Isuzu MD1CS089 (TC299) can be programmed in the workshop, no shipping, no RFT service.
ECUs from the same family
Ready to send your file?
Create your professional account, buy tokens and upload your original read. Your custom file comes back in 60 minutes maximum during opening hours, with a live estimate.
Live estimate · 60 min max during opening hours