Bosch MDG1 (protected MD1/MG1)
Bosch MDG1
The Bosch MDG1 is an ECU of the Bosch MDG1 (protected MD1/MG1) family. The tools we resell have announced access by Bench, Boot, Boot Glitch, VFI, HVR and unlock; the announcements, dated and sourced, are below.
MDG1 is not one more family: it is the name tool vendors give to MD1 and MG1 units carrying the stronger protection introduced on ECUs built from 2020 onwards. The announcements below report it at BMW and Mini, Mercedes-Benz and Porsche. The unit's actual reference is still an MD1 or an MG1; what changes is the access procedure, and that is exactly what those announcements describe.
Access, tool by tool
What each vendor announced for this reference, with the date and the original announcement. The route is the one the announcement states; when it does not, the cell says so.
| Tool | Announcement | Date | Announced route |
|---|---|---|---|
| MagicMotorsport | Korhex — Boot Glitch for VAG Bosch MDG1 (TC298 / TC299) | 26 October 2026 | Bench · Boot Glitch · VFI |
| Dimsport | HVR Mode — unlocking Bosch MDG1 | 24 September 2026 | Boot · HVR · unlock |
| MagicMotorsport | Mercedes MDG1: Boot Glitch with Korhex | 4 September 2026 | Boot Glitch |
| Dimsport | Bosch MDG1: new Bench solution for BMW and MINI | 28 August 2026 | Bench |
| MagicMotorsport | BMW & Mini MDG1: work in Bench | 13 August 2026 | Bench |
| MagicMotorsport | Porsche MDG1 TC2xx No RFT: More and More Compatibilities | 3 July 2026 | Boot Glitch |
| MagicMotorsport | More MDG1 TC2xx No RFT: New Models Available | 1 July 2026 | Boot Glitch |
| MagicMotorsport | Bosch MDG1 No RFT | 29 June 2026 | unlock |
What to send
- 1The complete original read, exactly as your tool produced it — OBD, bench or boot, whichever route you took.
- 2The tool and the mode used, so the file comes back in the format your tool expects.
- 3The DTC codes to remove if you order a DTC off.
Turnaround and price
60 minutes maximum during opening hours for a file already developed. A file never developed on this reference goes through custom work first: we then tell you the turnaround instead of promising one.
See the token price list →Frequently asked questions
Which tools open the Bosch MDG1, and by which route?
According to the announcements of the vendors we resell: MagicMotorsport (26 October 2026): Bench, Boot Glitch, VFI; Dimsport (24 September 2026): Boot, HVR, unlock; MagicMotorsport (4 September 2026): Boot Glitch; Dimsport (28 August 2026): Bench; MagicMotorsport (13 August 2026): Bench; MagicMotorsport (3 July 2026): Boot Glitch; MagicMotorsport (1 July 2026): Boot Glitch; MagicMotorsport (29 June 2026): unlock. Each announcement is linked and dated on this page: an announced opening holds as of its date.
What do I need to send for a Bosch MDG1 file?
The complete original read, exactly as your tool produced it — OBD, bench or boot, whichever route you took. The tool and the mode used, so the file comes back in the format your tool expects. The DTC codes to remove if you order a DTC off.
How long does a Bosch MDG1 file take, and what does it cost?
60 minutes maximum during opening hours for a file already developed; a file never developed goes through custom work first and we then tell you the turnaround. The price follows the public token price list.
The announcements in detail
Announcements from the tool vendors whose publications we relay, most recent first. Each line links to the original announcement with its date: an opening announced two years ago says nothing about the version you have installed.
Flex version 8.27.0.0 extends Korhex to the Bosch MDG1 control units of the Volkswagen group built on TC298 and TC299 processors: MG1CS002 H80, MG1CS008, MG1CS031 H80 and MD1CS004 H80 (TC298), and MD1CS014 (TC299). These units were already supported through voltage fault injection (VFI); Korhex now unlocks them without working directly on the PCB, and programming then continues in Bench mode. Memories: read, write and checksum of the internal flash, read and write of the internal EEPROM, full backup. An FLS0.20 Boot Glitch licence or a Flex Full FLS0.5 configuration is required; about 30 seconds to connect, 2 min 30 s to read and 2 minutes to write. Vehicles cited: Audi SQ5 (FY) 3.0 TDI and RS5 (F5) 2.9 V6, Cupra Formentor 2.0 TSI, Lamborghini Urus S 4.0 V8 and Volkswagen Golf VIII 2.0 TDI.
Dimsport announces HVR Mode for a selection of post-2021 Bosch MDG1 ECUs on protected INFINEON AURIX TC298TP/TC299TP microcontrollers. It requires the new HVR adapter cable, a two-point connection in BOOT (OPEN mode) and the temporary removal of one resistor. The source announces availability for the following week, without a date; the page title is in Italian while its body is in English.
Flex 8.17.0.0 opens Boot Glitch on Mercedes Bosch MD1CP001 and MG1CP002 units (SPC5777) through Korhex and EMFI: no soldering on the PCB, no components removed. Read/write/checksum of the internal flash, read/write of the internal EEPROM and full backup. FLS0.20 licence or Flex Full FLS0.5 required.
A new Bench solution lets The Genius reach the contents of Bosch MDG1 units on BMW and MINI and carry out programming operations without opening the ECU. Supported units: Bosch MD1CP032 (TC299), MD1CS001 (TC298), MG1CS024 (TC298), MG1CS049 (TC298) and MG1CS201 (TC298).
Flex 8.12.0.0 introduces a world-first solution for the latest-generation Bosch MDG1 units on BMW & Mini, everything stays in the workshop, in Bench.
With Flex 8.2.0.0, the Bosch MDG1 family with Aurix TC2xx processors manageable in Boot Glitch keeps growing, Porsche first in line.
Flex 8.1.0.0 adds new MDG1 units to Boot Glitch mode: FCA MD1CS069 (Ducato), BMW MD1CS001 and Ford MD1CP006.
Flex 8.0.0.0 introduces unlocking and programming of Bosch MDG1 units (Aurix TC2xx) in the workshop: VAG, BMW, Stellantis, Kia/Hyundai and JLR, no RFT.
Ready to send your file?
Create your professional account, buy tokens and upload your original read. Your custom file comes back in 60 minutes maximum during opening hours, with a live estimate.
Live estimate · 60 min max during opening hours