Stellantis EVPT VCU
Stellantis VCU3000
The Stellantis VCU3000 is an ECU of the Stellantis EVPT VCU family. The tools we resell have announced access by OBD, Bench and Boot; the announcements, dated and sourced, are below.
The VCU3000 is the electric powertrain control unit (EVPT) of the Stellantis group's small electric vehicles: Citroën AMI, Fiat Topolino and Opel Rocks-e. It is not an engine ECU in the classic sense — it governs the whole drivetrain — and access to it is recent.
Access, tool by tool
What each vendor announced for this reference, with the date and the original announcement. The route is the one the announcement states; when it does not, the cell says so.
| Tool | Announcement | Date | Announced route |
|---|---|---|---|
| MagicMotorsport | Exclusive: OBD for Stellantis EVPT VCU3000 | 16 September 2026 | OBD · Bench · Boot |
| MagicMotorsport | Stellantis EVPT VCU3000 in Bench | 31 July 2026 | Bench · Boot |
| Autotuner | EVPT VCU3000 | 25 June 2026 | Boot |
What to send
- 1The complete original read, exactly as your tool produced it — OBD, bench or boot, whichever route you took.
- 2The tool and the mode used, so the file comes back in the format your tool expects.
- 3The DTC codes to remove if you order a DTC off.
Turnaround and price
60 minutes maximum during opening hours for a file already developed. A file never developed on this reference goes through custom work first: we then tell you the turnaround instead of promising one.
See the token price list →Frequently asked questions
Which tools open the Stellantis VCU3000, and by which route?
According to the announcements of the vendors we resell: MagicMotorsport (16 September 2026): OBD, Bench, Boot; MagicMotorsport (31 July 2026): Bench, Boot; Autotuner (25 June 2026): Boot. Each announcement is linked and dated on this page: an announced opening holds as of its date.
What do I need to send for a Stellantis VCU3000 file?
The complete original read, exactly as your tool produced it — OBD, bench or boot, whichever route you took. The tool and the mode used, so the file comes back in the format your tool expects. The DTC codes to remove if you order a DTC off.
How long does a Stellantis VCU3000 file take, and what does it cost?
60 minutes maximum during opening hours for a file already developed; a file never developed goes through custom work first and we then tell you the turnaround. The price follows the public token price list.
The announcements in detail
Announcements from the tool vendors whose publications we relay, most recent first. Each line links to the original announcement with its date: an opening announced two years ago says nothing about the version you have installed.
Flex 8.20.0.0 adds exclusive OBD support for Stellantis EVPT VCU3000 units (TC234L) fitted to the group's electric city cars — Citroën AMI, Fiat Topolino, Opel Rocks-e — in Virtual Read from the diagnostic port, with map write and checksum. The unit no longer has to be opened or removed. OBD joins the Bench and Boot modes already available.
Flex 8.10.0.0 lets you fully back up the EVPT VCU3000 on Stellantis EVs via pinout, no Boot needed.
After Boot mode last February, the EVPT VCU3000 from Stellantis' micro-mobility range gets direct support, simpler in the workshop.
Ready to send your file?
Create your professional account, buy tokens and upload your original read. Your custom file comes back in 60 minutes maximum during opening hours, with a live estimate.
Live estimate · 60 min max during opening hours