Skip to content
Shop4Tuner

MagicMotorsport · November 5, 2026

Keihin 38770 / 790.41 / 796.41 (M16C) — Bench for Honda, KTM, Husqvarna, GASGAS

Keihin 38770 / 790.41 / 796.41 (M16C) — Bench for Honda, KTM, Husqvarna, GASGAS

Flex version 8.30.0.0 adds support for Keihin K-line control units built on M16C processors — Honda Keihin 38770-xxx-xxx, and KTM Keihin 790.41 and 796.41 — fitted to Honda, KTM, Husqvarna and GASGAS motocross bikes from 2013 to 2025. Honda units, usually located under the seat, are accessed via a Pinout connection; the KTM, Husqvarna and GASGAS units from the BMAG group support both OBD and Bench connections. For the Honda 38770 and the KTM 796.41, Flex details Bench mode precisely: read, write and checksum of the internal Flash, read and write of the external EEPROM, about 10 seconds to connect, 10 minutes to read and 4 minutes to write. The page gives no separate figures for the 790.41.

From the original announcement
« With Flex version 8.30.0.0, you can now work on Keihin K-line ECUs equipped with M16C processors, used in Honda, KTM, Husqvarna and GASGAS motocross bikes manufactured between 2013 and 2025. »

Shop4Tuner is an official MagicMotorsport reseller. Need the tool, an activation or advice on this update? Contact us, we use it daily in the workshop.

Ready to send your file?

Create your professional account, buy tokens and upload your original read. Your custom file comes back in 60 minutes maximum during opening hours, with a live estimate.

Live estimate · 60 min max during opening hours