Bosch EDC16 (diesel)
Bosch EDC16C39
The Bosch EDC16C39 is an ECU of the Bosch EDC16 (diesel) family. One vendor announcement cover it; they are dated and sourced below, and do not state the access route.
EDC16 is the Bosch diesel generation fitted from 2004 to 2012, between EDC15 and EDC17, on an Infineon TriCore TC1766 or TC1767 processor. It introduced torque-based control, kept by every Bosch diesel generation since: the pedal request becomes a torque request, and a calibration works on the torque tables as much as on injection and boost. The exact reference — C, CP, U followed by a number — decides the reading route; the announcements below state, tool by tool, what is open.
Vehicles we have met it on
Each link leads to the vehicle page: factory output and gains per engine variant. This list does not say what this ECU is fitted to in general, only where we found it.
Access, tool by tool
What each vendor announced for this reference, with the date and the original announcement. The route is the one the announcement states; when it does not, the cell says so.
| Tool | Announcement | Date | Announced route |
|---|---|---|---|
| Dimsport | NEW PROTUNE FOR THE AGRI WORLD: BOSCH EDC16C39 | 20 November 2025 | not stated by the vendor |
What we have delivered on it
Options already carried out on this reference. Each link leads to its page: what it does inside the ECU, what we expect from you and what it costs in tokens.
What to send
- 1The complete original read, exactly as your tool produced it — OBD, bench or boot, whichever route you took.
- 2The tool and the mode used, so the file comes back in the format your tool expects.
- 3The DTC codes to remove if you order a DTC off.
Turnaround and price
60 minutes maximum during opening hours for a file already developed. A file never developed on this reference goes through custom work first: we then tell you the turnaround instead of promising one.
See the token price list →Frequently asked questions
Which tools open the Bosch EDC16C39, and by which route?
According to the announcements of the vendors we resell: Dimsport (20 November 2025). Each announcement is linked and dated on this page: an announced opening holds as of its date.
Which options has Shop4Tuner already delivered on the Bosch EDC16C39?
DTC off. Each option is calibrated for this ECU, and feasibility on your vehicle is confirmed before your tokens are committed.
What do I need to send for a Bosch EDC16C39 file?
The complete original read, exactly as your tool produced it — OBD, bench or boot, whichever route you took. The tool and the mode used, so the file comes back in the format your tool expects. The DTC codes to remove if you order a DTC off.
What we have already handled
This ECU has already been through our workshop, on Fiat and Iveco.
The announcements in detail
Announcements from the tool vendors whose publications we relay, most recent first. Each line links to the original announcement with its date: an opening announced two years ago says nothing about the version you have installed.
ECUs from the same family
Ready to send your file?
Create your professional account, buy tokens and upload your original read. Your custom file comes back in 60 minutes maximum during opening hours, with a live estimate.
Live estimate · 60 min max during opening hours