Nieuws
Nieuwe protocollen, toolupdates en aankondigingen over dekking van Autotuner, MagicMotorsport en Dimsport (Race), de platformen die wij verdelen en dagelijks gebruiken. Samengevat door ons team, met een link naar elke originele aankondiging.
BitBox · September 18, 2026
AECS FC-54 (Chery)
BitBox adds support for AECS FC-54 ECUs, built on NXP SPC563M64 microcontrollers and used on Chery petrol vehicles, in its China Delphi/AECS Petrol module.
Autotuner · September 18, 2026
Continental EMS2204 / EMS2205 / EMS2208
AutoTuner now supports the Continental EMS2204, EMS2205 and EMS2208 engine ECUs in 100% OBD Normal Read and write (TC1738/TC1766, checksum correction). Coverage targets Ford petrol and hybrid models — B-Max, C-Max, EcoSport, Fiesta, Focus, Mondeo — plus the Lincoln MKZ 2.0 HEV.
BitBox · September 16, 2026
Motion SE07
BitBox adds support for Motion SE07 ECUs, used on various brands of Chinese-made motor vehicles, in its China Motion Moto/Extreme module.
Autotuner · September 16, 2026
Suzuki MH8115F
AutoTuner adds the Mitsubishi MH8115F ECU in 100% OBD Virtual Read on Euro 5 Suzuki motorcycles and scooters: AN 400 Burgman/Skywave, DL 650 V-Strom and SV 650 from 2021. The Euro 5 6-pin motorcycle OBD cable is required.
MagicMotorsport · September 16, 2026
Exclusive: OBD for Stellantis EVPT VCU3000
Flex 8.20.0.0 adds exclusive OBD support for Stellantis EVPT VCU3000 units (TC234L) fitted to the group's electric city cars — Citroën AMI, Fiat Topolino, Opel Rocks-e — in Virtual Read from the diagnostic port, with map write and checksum. The unit no longer has to be opened or removed. OBD joins the Bench and Boot modes already available.
Autotuner · September 15, 2026
Continental EMS2101 / EMS2102 / EMS2103 / EMS2106
AutoTuner adds the Continental EMS2101, EMS2102, EMS2103 and EMS2106 ECUs in 100% OBD Normal Read and write (C167, checksum correction), aimed at Ford naturally aspirated petrol engines: B-Max 1.4i 16v, Fiesta 1.25i Duratec 16v and 1.6i Ti-VCT, Mondeo 1.6i Ti-VCT.
BitBox · September 11, 2026
Yeson 28D-96
BitBox adds support for Yeson 28D-96 ECUs, used on various brands of Chinese-made motor vehicles, in a brand-new module called China Yeson Moto/Extreme.
Autotuner · September 11, 2026
Bosch MD1CE100 / MD1CE101
Bench Normal Read and write for the Bosch MD1CE100 (TC299 + TC389) and MD1CE101 (TC299) ECUs, with checksum correction, backup and a required Mail-in Unlock. Coverage spans trucks (MAN TG, Ford F-MAX/Cargo, VW Constellation/Meteor, Shacman, Sinotruk, Kamaz), agricultural machinery (Fendt, Case IH, New Holland, Steyr, Claas) and construction equipment (Doosan/Develon, Case Construction, Zoomlion, Dieci, Faresin, Horsch).
Autotuner · September 10, 2026
Bosch MG1CS032
Bench Normal Read and write for the Bosch MG1CS032 ECU (SPC58N), with checksum correction, backup and a required Mail-in Unlock. It covers the Stellantis 1.2 PureTech/Turbo petrol engine: Peugeot 208, 2008 and 301, Citroën/DS DS 3 Crossback, Opel/Vauxhall Corsa and Mokka.
Autotuner · September 9, 2026
Motion DE08 / FE08 / FE08.02 / SE08 / MT05.C
The whole Motion ECU family (DE08, FE08, FE08.02, SE08, MT05.C) is added in 100% OBD Normal Read and write (SPC572L64, checksum correction), for two-wheelers and light vehicles from QJMOTOR, Benda, Zontes, KL Motorcycles, Keeway, RKS Motor, Hyosung, Romet and Togo Motosiklet.
BitBox · September 8, 2026
BMW Bosch MG1/MD1 SPC5777, 2020 onwards
BitBox adds Bench support for Bosch MG1/MD1 units built from 2020 onwards on the NXP SPC5777 microcontroller, for petrol and diesel BMW and Mini. It lands in the Bosch MG1/MD1 Gen2 BENCH module, which works with Scanmatik SM2/SM3 interfaces only.
Autotuner · September 8, 2026
Bosch MD1CS069 / MD1CE101 — BETA
Released in BETA: Bosch MD1CS069 and MD1CE101 in 100% OBD Normal Read and write (TC299, bootloader + software + calibration readout, checksum correction). It covers agricultural, construction and heavy-duty machinery from Case IH, Case Construction, New Holland, Claas, Deutz-Fahr, Same, Lamborghini, Steyr, Landini, McCormick and Massey Ferguson.
MagicMotorsport · September 8, 2026
Mercedes Truck CPC5 after 2020, with Korhex
Flex 8.18.0.0 adds Mercedes Truck Bosch CPC5 units (SPC58) on vehicles built after 2020, worked in Boot Glitch with Korhex — the hardware extension driven by Flex — using EMFI (electromagnetic fault injection). Read/write/checksum of the internal flash, read/write of the internal EEPROM and full backup, on Actros and Arocs among others. FLS0.20 licence or Flex Full FLS0.5 required.
MagicMotorsport · September 8, 2026
Korhex: direct MCU access for ECU programming with Flex
A presentation of the tool rather than a vehicle release. Korhex is a hardware extension for the Flex programmer that reaches a contact point on the microcontroller of supported ECUs during unlocking and Boot Glitch procedures, using EMFI. It is not a standalone programmer — Flex drives the whole sequence — and it removes traditional Boot preparation such as desoldering a resistor or wiring Boot pins by hand. Flex Full (FLS0.5M/S) or Flex Boot Glitch (FLS0.20M/S) required.
Autotuner · September 7, 2026
Bosch EDC15C6 / EDC15C6.5-70
Bosch EDC15C6 and EDC15C6-5.70 are added in 100% OBD Normal Read and write (C167, checksum correction), covering Mercedes-Benz CDI diesels: C-Class W203 including the C 30 CDI AMG, CLK C209, E-Class W210/W211, S-Class W220, G-Class W463, ML W163, plus the Sprinter and Viano vans.
PCMflash · September 6, 2026
PCMflash 1.5.0
PCMflash 1.5.0 extends three bootloader modules. Module 92 (Bosch MD1/MG1 Bootloader) now covers BMW MD1/MG1 units built after mid-2020 on SPC5777M and TC29x, with reading, writing, unlocking and flash checksum correction. Module 82 adds two 7DCT300 gearbox variants, and module 86 adds the EAST80.C1 unit of Jetour vehicles with DF727 transmissions.
BitBox · September 4, 2026
Bosch PDCU8.0
BitBox adds Bench support for Bosch PDCU8.0 ECUs built on the Infineon Aurix TC389 microcontroller, on Chinese petrol vehicles. It lands in the first-generation Bosch MG1/MD1 BENCH module, for Scanmatik SM2/SM3 interfaces only. No vehicle brand is named in the announcement.
Autotuner · September 4, 2026
Bosch ECS1049
Bench Normal Read and write for the Bosch ECS1049 ECU (TC399), with checksum correction and backup. It targets the Euro 7 BMW M S58 engine with « BMW M Ignite » technology: M3 (G80/G81) and M4 (G82/G83) from July 2026, M2 (G87) from August 2026 — replacing the earlier Bosch MG1CS049.
MagicMotorsport · September 4, 2026
Mercedes MDG1: Boot Glitch with Korhex
Flex 8.17.0.0 opens Boot Glitch on Mercedes Bosch MD1CP001 and MG1CP002 units (SPC5777) through Korhex and EMFI: no soldering on the PCB, no components removed. Read/write/checksum of the internal flash, read/write of the internal EEPROM and full backup. FLS0.20 licence or Flex Full FLS0.5 required.
Autotuner · September 3, 2026
Continental M3D
Continental M3D ECUs are added in 100% OBD Virtual Read, with write and checksum correction (MPC5534), using the Ducati 4-pin OBD cable. Covered Ducati models: Hypermotard 950 / 950 SP, Monster 821, Monster 1200 / 1200S / 1200R, SuperSport / SuperSport S and Scrambler 1100.
Autotuner · September 2, 2026
BMW DME8: improved OBD Unlock Patch
Not a new protocol but an improved OBD Unlock Patch for BMW DME8 ECUs (Bosch MG1CS024, MG1CS049 and MG1CS201, all TriCore TC298). It prevents the FSC-related DTCs (1B2904, 1F2102, sometimes 021204 / 21B210) raised when flashing modified files. Applying it requires a new Bench unlock, even on an ECU already unlocked with an earlier version.
MagicMotorsport · September 2, 2026
SPC58N unlock with Korhex
Flex 8.16.0.0 extends Korhex to the new-generation SPC58N microcontrollers, with a dedicated Boot Glitch procedure for the BRP Bosch MG1CA920 unit used on Rotax engines. No resistor to remove, no Boot point to solder by hand. Read/write/checksum of the internal flash, read/write of the internal EEPROM and full backup. FLS0.20 licence or Flex Full FLS0.5 required.
Autotuner · September 1, 2026
Bosch ECM4
Bosch ECM4 ECUs are added in 100% Bench Normal Read and write (TC299, checksum correction, backup). Coverage targets 13-litre Euro 6 truck engines: Renault Trucks DTI13 (C, D, K and T), Volvo Trucks D13K (FH New Generation, FMX) and Mack Trucks MP8 (Anthem, Pinnacle).
Dimsport · September 1, 2026
Bosch ECM4 in Bench mode
The Genius now works the Bosch ECM4 engine ECUs in Bench, through the unit's connector and without opening it. Coverage targets heavy trucks built since 2022: Volvo Trucks FH / FH Aero and FM, Renault Trucks T / T High and C, Mack Trucks Anthem and Pinnacle.
Dimsport · September 1, 2026
Bosch MD1/MG1 for BMW and MINI: complete RACE settings
Alongside the new Bench release, Dimsport publishes comprehensive RACE setting files for the Bosch MD1 and MG1 units of BMW and MINI, opening a wider range of maps and parameters for calibration. Listed applications include the BMW M3 (G80/G81), M4 (G82/G83), M2 (G87), M240i (G42), 340d (G20/G21), X5 (G05) and 320d (G20/G21). This is a calibration addition, not a new access mode.
Autotuner · August 31, 2026
Continental M3C (Ducati)
Continental M3C ECUs are added in 100% OBD Normal Read and write (MC9S12, checksum correction), using the Ducati 4-pin OBD cable. Covered Ducati models: Hypermotard 1100 Evo, Monster 1100 Evo, Monster 659, 796 ABS and 797, Scrambler 800 (Icon, Full Throttle, Café Racer, Desert Sled) and Scrambler Sixty2.
MagicMotorsport · August 31, 2026
DAF Delphi ETC3 UDS with Korhex
Flex 8.15.0.0 lets Korhex unlock DAF Delphi ETC3 UDS units (MPC5566) in Boot Glitch, in the workshop — the unit no longer has to be shipped to MagicMotorsport's laboratories through the RFT service. Once unlocked: read/write/checksum of the internal flash, read/write of the external flash and full backup. FLS0.20 licence or Flex Full FLS0.5 required.
Autotuner · August 28, 2026
Bosch MEVD17.2.x
Bosch MEVD17.2.2 (TC1796/TC1797), MEVD17.2.7 and MEVD17.2.9 are added in 100% OBD Virtual Read and write, with no ECU removal, checksum correction and a back-to-stock function. Coverage: MINI N14/N18 1.4 DFI, 1.6 DFI and 1.6 Turbo (R55-R61, 2007-2014) and BMW 28i N20 2.0T (2, 3, 3 GT, 4, 4 Gran Coupé, 5, 5 GT, X3, X4, X6, 2009-2014).
Dimsport · August 28, 2026
Bosch MDG1: new Bench solution for BMW and MINI
A new Bench solution lets The Genius reach the contents of Bosch MDG1 units on BMW and MINI and carry out programming operations without opening the ECU. Supported units: Bosch MD1CP032 (TC299), MD1CS001 (TC298), MG1CS024 (TC298), MG1CS049 (TC298) and MG1CS201 (TC298).
Autotuner · August 27, 2026
New Console Export & Clear features
A software feature release rather than a protocol: the AutoTuner software gains one-click console log export on every operation (Ident, Read, Write), automatic file naming from the vehicle VIN when available, and a « Clear Console Log » button.
BitBox · August 26, 2026
Magneti Marelli 11RZ
BitBox adds support for Magneti Marelli 11RZ ECUs, built on Infineon Aurix TC277 microcontrollers and fitted to the Moto Morini X-CAPE 1200, in its Magneti Marelli BENCH-CAN module — bench access over CAN.
Autotuner · August 26, 2026
Delphi DCM3.2AP
The Delphi DCM3.2AP ECU is added in 100% OBD mode, Normal Read and write (MPC563, checksum correction), with no ECU removal. It covers the Kia 2.9 CRDi Euro 4 diesel engine in the Kia Bongo (2014+) and the Kia Carnival / Sedona (2005+).
MagicMotorsport · August 25, 2026
BMW Marelli MBC1 and MBC2 in Bench
Flex 8.14.0.0 adds Bench support, worked directly by pinout, for Marelli MBC1 and MBC2 units (XC20xx) fitted to BMW Motorrad and Husqvarna motorcycles, with full read of the unit's content. Read/write/checksum of the internal flash, read/write of the external EEPROM and full backup, under FLS0.1M/S, FLS0.13M/S or FLS0.5M/S licences.
Autotuner · August 24, 2026
Marelli 9GV
The Marelli 9GV ECU is added in Bench mode, Normal Read and write (SPC563M64, checksum correction, backup). It covers Volkswagen 1.6 Flexfuel and 1.6 MSI models sold in LATAM and export markets: Fox, CrossFox, Gol, Saveiro, Voyage, SpaceFox, Vento and Jetta.
Autotuner · August 21, 2026
Siemens MS42
The Siemens MS42 ECU is added in 100% OBD Normal Read and write (C167 / 29F400, checksum correction), with no ECU removal. It covers the BMW M52TU double-VANOS straight-six: 3 Series E46 (320i, 323i, 328i), 5 Series E39 (520i, 523i, 528i), 7 Series E38 (728i) and Z3 2.0 / 2.3 / 2.8.
MagicMotorsport · August 20, 2026
VAG Bosch MG1CS111 TC298 without RFT
Flex 8.13.0.0 makes the VAG Bosch MG1CS111 (TriCore TC298) workable without shipping: Boot Glitch unlocking in the workshop, then work in Bench — no RFT mail-in to MagicMotorsport's laboratories. Boot unlock, read/write/checksum of the internal flash, read/write of the internal EEPROM and full backup, on Audi, Cupra, Škoda and Volkswagen 2.0 TSI. Flex Full Master (FLS0.5M) or Slave (FLS0.5S) licence required.
Autotuner · August 19, 2026
Bosch MSE9.0
The Bosch MSE9.0 ECU is added in Bench mode, Normal Read (TC375, read in one minute, write in 45 seconds, automatic checksum correction and backup). It covers latest-generation Powersports vehicles including the CFMOTO 1000 MT-X and 675 SR-R (A2 version included), plus flagship models from Loncin, Voge, Zontes and ZXMOTO.
BitBox · August 14, 2026
BMW Bosch MG1/MD1 TC29x, 2020 onwards
BitBox opens a new module, Bosch MG1/MD1 Gen2 BENCH, for Bosch MG1/MD1 units built from 2020 onwards on petrol and diesel BMW and Mini, with Scanmatik SM2/SM3 interfaces only. Note that the announcement contradicts itself on the microcontroller: its title says Aurix TC29x, its body says TC28x.
Autotuner · August 14, 2026
BMW DDE8/DME8 in Bench (No Mail-in Unlock)
The Bosch DDE8 and DME8 ECUs (BMW) are now supported in Bench read/write on AutoTuner, no mail-in unlock required.
MagicMotorsport · August 13, 2026
BMW & Mini MDG1: work in Bench
Flex 8.12.0.0 introduces a world-first solution for the latest-generation Bosch MDG1 units on BMW & Mini, everything stays in the workshop, in Bench.
MagicMotorsport · August 10, 2026
Ford Bosch MD1CP061 No RFT
Flex 8.11.0.0 adds Ford Bosch MD1CP061 via Boot Glitch then Bench, unlock and finish in the workshop, no RFT.
Autotuner · August 3, 2026
Bosch EDC15C7 (GM) - BETA
The Bosch EDC15C7, fitted to many early-2000s General Motors vehicles, is now supported on AutoTuner in BETA.
MagicMotorsport · July 31, 2026
Stellantis EVPT VCU3000 in Bench
Flex 8.10.0.0 lets you fully back up the EVPT VCU3000 on Stellantis EVs via pinout, no Boot needed.
Autotuner · July 31, 2026
Bosch Mx7.9.5x
The Bosch Mx7.9.5x family (M7.9.5, ME7.9.5…), the ultimate city cars, is now supported on AutoTuner.
Autotuner · July 29, 2026
Aisin AL1000 (VAG)
The Aisin AL1000 automatic gearbox TCU (VAG) is now supported via OBD Virtual Read on AutoTuner.
MagicMotorsport · July 29, 2026
Honda Keihin 38770-Mxx in OBD Full & Bench
A new exclusive Flex solution for Honda Keihin 38770-Mxx (RH850) units, now programmable in OBD Full.
Autotuner · July 28, 2026
New Backup File Tool (BETA)
AutoTuner launches its Backup File Tool in BETA, now available to the whole community on AT Cloud.
Autotuner · July 27, 2026
Aisin AQ450 (VAG)
The Aisin AQ450 automatic gearbox TCU (VAG) is now supported via OBD Virtual Read on AutoTuner.
Autotuner · July 24, 2026
Bosch MG1CS202 / MG1CS203
The latest-generation Bosch MG1CS202 and MG1CS203 ECUs are now supported on AutoTuner.
MagicMotorsport · July 24, 2026
MAN Bosch MD1CE100 TC299 No RFT
Flex 8.8.0.0 brings new-generation MAN Bosch MD1CE100 industrial-vehicle ECUs into the fold, no RFT.
Autotuner · July 22, 2026
Bosch MD1CP062 - Ford Ranger Super Duty
AutoTuner extends its 100% OBD protocol for Ford Bosch MD1CP062 to the new Ford Ranger Super Duty.
MagicMotorsport · July 22, 2026
Toyota Denso Gen2 in Bench
Flex 8.7.0.0 adds Bench programming for Toyota Denso Gen2 units on 2.4L and 2.8L diesels.
Autotuner · July 20, 2026
Denso P5.0SC
The Denso P5.0SC ECU is now officially supported on AutoTuner.
Autotuner · July 17, 2026
Bosch MD1CS015/MD1CS115
The Bosch MD1CS015 and MD1CS115 (DDE9), latest-generation diesel ECUs, are now supported in Bench mode.
MagicMotorsport · July 16, 2026
VAG Bosch MG1CS011 TC298 No RFT
Flex 8.6.0.0 adds the VAG Bosch MG1CS011 (TC298) to Boot Glitch mode, then Bench programming: everything stays in the workshop, no RFT.
Autotuner · July 15, 2026
Bosch MG1CS221
The Bosch MG1CS221 (DME9), the ECU of the most exclusive prestige segment, is now officially supported.
Autotuner · July 14, 2026
MyFlasher 2.7.0
MyFlasher 2.7.0: a major update to the mobile app that goes with the One, with a reworked experience.
MagicMotorsport · July 14, 2026
Improved Boot Glitch Protocols
Flex 8.5.0.0 brings solid improvements to Boot Glitch mode on Bosch units with TC2xx processors: simpler, faster and more reliable in the workshop.
Autotuner · July 13, 2026
Sagem S2000
The Sagem S2000, a cornerstone of the Renault lineup from 1998 to 2012, joins the tool: French youngtimers are covered.
Autotuner · July 10, 2026
Mitsubishi M32R
The Mitsubishi M32R, the ECU behind Ducati's finest superbikes, is now supported via OBD.
Autotuner · July 9, 2026
Bosch MD1CP010 / MD1CP011 / MG1CS046 / MG1CS100
A massive Bench wave: the latest-generation Bosch ECUs of the modern Mercedes-Benz lineup (MG1CS046, MG1CS100, MD1CP010, MD1CP011) join the Autotuner tool.
MagicMotorsport · July 9, 2026
VAG Bosch MD1CS014 TC299 No RFT
Flex 8.4.0.0 opens VAG Bosch MD1CS014 (TC299) units to Boot Glitch mode: handled in the workshop, no shipping, no RFT service.
Autotuner · July 8, 2026
Bosch MG1CP777 / MG1CS701
The Bosch MG1CS701 (MRG5) and MG1CP777 (MRG4) fitted to recent everyday Mercedes models are now officially supported.
Autotuner · July 7, 2026
Bosch MG1CP004
The Bosch MG1CP004 (MRG1PI), the ECU of the latest Mercedes-AMG models from Affalterbach, joins the Autotuner protocol list.
Autotuner · July 6, 2026
Bosch MG1CP003
Autotuner adds support for the Bosch MG1CP003 (MRG1V8), the ECU behind Germany's most exclusive V8 engines.
MagicMotorsport · July 6, 2026
MG1CS049 & MD1CS089 Unlock No RFT
Flex 8.3.0.0 extends Boot Glitch mode: BMW Bosch MG1CS049 (TC298) and Isuzu MD1CS089 (TC299) can be programmed in the workshop, no shipping, no RFT service.
Autotuner · July 3, 2026
Bosch EDC17C87
The Bosch EDC17C87 is now supported in Bench mode: Autotuner widens its off-highway and agricultural coverage.
MagicMotorsport · July 3, 2026
Porsche MDG1 TC2xx No RFT: More and More Compatibilities
With Flex 8.2.0.0, the Bosch MDG1 family with Aurix TC2xx processors manageable in Boot Glitch keeps growing, Porsche first in line.
Autotuner · July 2, 2026
Bosch MG1CS211
Support arrives for Bosch MG1CS211 ECUs, at the heart of today's hybrid drivetrains.
Autotuner · July 1, 2026
Bosch MD1CS014 / MD1CS064
Bosch MD1CS014 (gen 2 included) and the brand-new MD1CS064 join the tool: VAG's premium diesel segment is covered.
MagicMotorsport · July 1, 2026
More MDG1 TC2xx No RFT: New Models Available
Flex 8.1.0.0 adds new MDG1 units to Boot Glitch mode: FCA MD1CS069 (Ducato), BMW MD1CS001 and Ford MD1CP006.
Autotuner · June 29, 2026
Continental 5WY8
The Continental 5WY8, fitted to a wide range of Ford group vehicles from 2004 to 2015, is now supported.
MagicMotorsport · June 29, 2026
Bosch MDG1 No RFT
Flex 8.0.0.0 introduces unlocking and programming of Bosch MDG1 units (Aurix TC2xx) in the workshop: VAG, BMW, Stellantis, Kia/Hyundai and JLR, no RFT.
Autotuner · June 26, 2026
Bosch MG1CS031 / MG1CS142
MG1CS031 support grows beyond the initial OBD references and the MG1CS142 arrives: VAG's flagship petrol engines move forward.
Autotuner · June 25, 2026
EVPT VCU3000
After Boot mode last February, the EVPT VCU3000 from Stellantis' micro-mobility range gets direct support, simpler in the workshop.
Autotuner · June 24, 2026
Bosch MD1CS004 / MD1CS104
A new step for VAG diesels: Bosch MD1CS004 coverage widens and the MD1CS104 arrives.
Autotuner · June 22, 2026
Bosch MED9.5.10
Back to the icons of the 2000s: the Bosch MED9.5.10 is now supported on the Autotuner tool.
MagicMotorsport · June 22, 2026
GPEC5 No RFT
Flex 7.60.0.0 unlocks the Continental GPEC5 on Jeep and RAM in Boot then programs them via OBD, with the new FLX2.88 cable.
Autotuner · June 19, 2026
Honda MPC5554 / R7F701202 / TC1793
OBD support expands across Honda and Acura with the MPC5554, R7F701202 and TC1793 ECUs, complementing the Keihin update.
Autotuner · June 17, 2026
Honda SHxxxx / TCxxxx
Massive Keihin update: more than two decades of Honda and Acura (SH7058, SH72543, TC1782, TC275) now supported.
Autotuner · June 16, 2026
MyFlasher 2.6.0
MyFlasher 2.6.0 is available on iOS and Android for One users, with a reworked onboarding flow.
Autotuner · June 16, 2026
Subaru SH705x/SH7254x OBD NR BETA
The Subaru range lands in beta: Denso (SH7058, SH7059) and Hitachi ECUs via OBD.
Autotuner · June 15, 2026
Siemens MSS52/MSS54/MSS54HP
The legendary Siemens MSS52, MSS54 and MSS54HP from the BMW M cars are now officially supported.
Autotuner · June 12, 2026
Bosch MG1CS039
The Bosch MG1CS039, the ECU at the summit of Italian engineering, joins the Autotuner protocol list.
Dimsport · June 9, 2026
New OBDII Protocol for Continental SID212 Installed on Ford Vehicles
Race opens an OBDII protocol for Ford's Continental SID212 units: read and write through the diagnostic port.
MagicMotorsport · June 8, 2026
Flex for SID212 SID212EVO No Unlock
Flex 7.59.0.0: direct access to maps and EEPROM on Ford Continental SID212 and SID212EVO, no prior unlock needed.
MagicMotorsport · May 25, 2026
New Flex protocols for Triumph ECUs
Flex 7.58.0.0 brings OBD to the Keihin KTKS_v1 (RH850) and KHR4 (SH72531) on Euro 4 and Euro 5 Triumph motorcycles.
Dimsport · May 12, 2026
RACE supports the new Bosch MSE9.0 installed on CFMOTO models
The new Bosch MSE9.0 fitted to CFMOTO bikes is now supported by Race: motorcycle coverage keeps growing.
MagicMotorsport · May 11, 2026
Exclusive Heavy-duty Flex Solutions
Flex 7.57.0.0 targets commercial and industrial vehicles: Bench and Boot on Delphi ETC3 KWP units for Iveco, Hyundai and Kia.
Dimsport · May 7, 2026
A new exclusive application for the OHW and tractor world.
An exclusive application for the agricultural and off-highway world: the LIDEC ECU2 HD joins Race.
MagicMotorsport · April 28, 2026
Flex for KTKZ2 and KTKZ3
Flex 7.56.0.0 programs Keihin KTKZ2 and KTKZ3 (RH850) via OBD on recent Euro 5+ KTMs, including 2025 and 2026 models.
Dimsport · April 14, 2026
ProTune now supports BOSCH EDC17C76 on BMW Diesel engines
ProTune now supports the Bosch EDC17C76 found on BMW diesel engines.
MagicMotorsport · April 13, 2026
Flex OBD and Boot for Ducati Continental M3D
Flex 7.55.0.0 covers Ducati bikes with Continental M3D ECUs: OBD with the 4-pin MMS03.003 cable, or Boot for full access.
Dimsport · April 8, 2026
New ProTune Update: BOSCH EDC17C79
The Bosch EDC17C79, one of the most widespread diesel ECUs, enters the ProTune catalogue.
MagicMotorsport · March 31, 2026
Flex RFT Service for VAG Bosch MD1CS004 - Ready For Tuning
Flex 7.54.0.0 launches the RFT service for Bosch MD1CS004 (HW 05L907309AA): OBD programming on VAG 2.0 TDI models from 2022 to 2024.
MagicMotorsport · March 30, 2026
Flex OBD Protocol for Ford Fomoco UTCU4 - F-250 and F-350
Flex 7.53.0.0 opens OBD on the UTCU4 transmission units of Ford F-250 and F-350 with 6.7L and 7.3L engines, through the diagnostic port.
MagicMotorsport · March 26, 2026
Flex Bench Support for VAG Bosch DQ500 Gen2, DQ38x, and ZF AL552
Flex 7.52.0.0 brings Bench mode to recent VAG TCUs: DQ500 Gen2, DQ38x (2022+) and ZF AL552 Gen2, cloning included.
MagicMotorsport · March 17, 2026
Flex Exclusive: FCA Marelli 12GF in OBD Mode
Flex 7.51.0.0 exclusive: OBD programming of Marelli 12GF units on modern FCA vehicles, with the SGW Bypass cable MMS03.001.
Dimsport · March 16, 2026
New update for Iveco: BOSCH MD1CS069
The FLASH_0823 protocol evolves: Race now manages the Bosch MD1CS069 fitted to Iveco vehicles.
MagicMotorsport · March 12, 2026
Flex Bench and OBD for Ford Continental SID212 and SID212EVO
With Flex 7.50.0.0, no more RFT on Ford SID212 and SID212EVO: direct read and write on the bench, then OBD after unlock.
Dimsport · March 12, 2026
Dimsport Unlocks MOTION DE08/FE08 ECUs on Zontes
Dimsport unlocks the MOTION DE08 and FE08 ECUs of the new Zontes 703 platforms through the FLASH_0993 protocol.
Dimsport · February 10, 2026
New serial protocol - latest-generation BOSCH MD1xxx
A new serial protocol covers latest-generation Bosch MD1xxx units.
Dimsport · January 22, 2026
Ducati DESMO450 MX: RACE IS ON!
The Ducati DESMO450 MX enters the Race list: Italian off-road joins the lineup.
Dimsport · December 5, 2025
MORE POWER WITH A CLICK ON FORD RANGER: BOSCH MD1CP061
More power in one click on the Ford Ranger: the Bosch MD1CP061 is covered, with ProTune to back it up.
Dimsport · November 27, 2025
PORSCHE ME7.8.x: NOW YOU CAN REMAP THEM WITH PROTUNE
Porsche models running the ME7.8.x ECU can now be remapped with ProTune.
Dimsport · November 20, 2025
NEW PROTUNE FOR THE AGRI WORLD: BOSCH EDC16C39
New ProTune for the agri world: the Bosch EDC16C39 is now supported.
Dimsport · November 6, 2025
DELCO E98 REPROGRAMMING WITH PROTUNE
The Delco E98 can now be reprogrammed with ProTune: Dimsport's calibration service widens its coverage again.
Dimsport · November 3, 2025
NEW SERIAL PROTOCOL FOR BOSCH MG1CS036
New serial protocol for the Bosch MG1CS036: read and write on numerous Ford petrol engines.
Dimsport · October 30, 2025
OBDII REMAPPING FOR FORD RANGER AND VW AMAROK
With the new FLASH_0970 serial protocol, direct OBDII tuning lands on the Bosch MD1CP061 of the Ford Ranger and VW Amarok.
Klaar om uw file door te sturen?
Maak uw professioneel account aan, koop tokens en upload uw originele uitlezing. Uw custom file is terug binnen maximaal 60 minuten, met een schatting in realtime.
Schatting in realtime, maximaal 60 minuten